HELP Please! how set up "cross controlls" on g920?

on AC on PC.is impossible to set "cross controls". i'd like to set themto see right,left or back.......but it's impossible. it seems not recognise them.Why??

 

when you say "cross controls" do you mean the D pad (the up down left right pad) Unfortunately even on the old Logitech G25 on the PC version of AC you cannot set those controls, i wanted them for look, but you can't.. I guess the 4 fire buttons on your wheel (ABXY..) are the equivalent of the 4 buttons on the G25's shifter block. Which is what i ended up using.. On the g25, the shifter had all the buttons, the wheel only had 2 + the paddle shifters. on the shiftr block you had the 4 main fire buttons + another 4. So i use the main 4 as the look buttons (X left, A back, B right) Then i used the 4 remaining buttons for the important controls you need assigned close by and the 2 wheel buttons for handbrake and horn.

SO in short, don't think you will be able to use the D pad for look controls, so you will have to substitute 4 buttons instead (i suggest ABXY)

Also.. Your username. Brumi.. I'm guessing you are from Birmingham? I was born in Brum and lived in Northfield until i was about 5, then moved back again when i was about 25 for another 4 years (worked on broad street and lived in the flats just off Five ways round about)
If your not from Birmingham, then none of that will make ANY sense,... Just ignore it and keep going

EDIT: BTW did you realise you are in the console section asking about AC on PC help? i only just noticed it, i saw the section area and presumed it was a console problem, it wasnt until i went back to make sure i read your post properly when i then spotted and processed AC on PC...