DOCS The Server Admin Handbook thread

Thank You,

now with :
{
"entries": [
{
"drivers": [
{
"playerID": "S76561198082177418"
}
],
"raceNumber": 747,
"forcedCarModel": -1,
"overrideDriverInfo": 0,
"isServerAdmin": 0
}
]
}

I´ve lost my Name:

 

about the entry list, for example, it's correct the list below with 2 single drivers, one team with 2 drivers and another team with 3 drivers? thanks

Code:

{
 "entries": [
 {
 "drivers": [
 {
 "playerID": "S765611xxxxxxxxxx1"
 }
 ],
 "raceNumber": -1,
 "forcedCarModel": -1,
 "overrideDriverInfo": 0,
 "isServerAdmin": 0
 },

{
 "drivers": [
 {
 "playerID": "S211547xxxxxxxxxx2"
 }
 ],
 "raceNumber": -1,
 "forcedCarModel": -1,
 "overrideDriverInfo": 0,
 "isServerAdmin": 0
 },

 {
 "drivers": [
 {
 "firstName": "First",
 "lastName": "Driver",
 "shortName": "team number one",
 "driverCategory": 0,
 "playerID": "S9684744xxxxxxxxxx3"
 },
 {
 "firstName": "second",
 "lastName": "driver",
 "shortName": "team number one",
 "driverCategory": 0,
 "playerID": "S956233xxxxxxxxxx4"
 }
 ],
 "raceNumber": -1,
 "forcedCarModel": -1,
 "overrideDriverInfo": 0,
 "isServerAdmin": 0
 },

{
 "drivers": [
 {
 "firstName": "First",
 "lastName": "Driver",
 "shortName": "team number TWO",
 "driverCategory": 0,
 "playerID": "S9684744xxxxxxxxxx5"
 },
 {
 "firstName": "second",
 "lastName": "driver",
 "shortName": "team number TWO",
 "driverCategory": 0,
 "playerID": "S956233xxxxxxxxxx6"
 },
{
 "firstName": "third",
 "lastName": "driver",
 "shortName": "team number TWO",
 "driverCategory": 0,
 "playerID": "S114544xxxxxxxxxx7"
 }
 ],
 "raceNumber": -1,
 "forcedCarModel": -1,
 "overrideDriverInfo": 0,
 "isServerAdmin": 0
 }

 ]
}

 

Shouldn´t the racenumbers be the same in one Team?

 

Argh, i hoped those pcap logs were sign of a linux version of the acc server.. too bad

 

@Minolin

Force Team name not enable?

 

(I'm running on the 1.0.2 open beta, let me know if things are different in the normal release, or if I need to wait for 1.0.3)

So the "maxClientsOverride" value doesn't appear to be working; it doesn't matter if it's passworded or not.

1. Setting maxClients in configuration.json to 35 (trying for extra space for spectators alongside a full grid) and setting "maxClientsOverride" to any value (above or below 30) ends up with this result:

"Overriding maxClients 35 (configuration.json) to 30 (settings.json)"

2. Leaving maxClients in configuration.json to 30 and dropping "maxClientsOverride" 20 ends up with no information about changing the maxClient size; checking the server on ACC shows 30 slots available.

Edit: Also just a bug for LAN servers, all of my servers show incorrect information when looking at the LAN server list; searching for them in the online list brings up accurate information.

In the LAN list they all show as 24 slot 8H Endurance type servers, nothing that matches what I actually have set (E_6h, 30 slot)

 

I got a fatal error when doing the driver swap. I pitted in after requesting the stop, then when it happened it crashed for me and my friend.

 

Where do we create the "results" folder?

 

For your information



III.2 Configuration files states

If I try that no files are created and the server log shows

 

Hi can also confirm that we experienced the same on our server when we tried to join in teams.

In addition, with entrylist file active on server I experience an issue with the car not starting, or it starts, but shuts down again. To exit pit I have to press the starter button while driving out of pits, can then speed up, but as soon as I stop engine will stop. Can also see driver arm constantly moving down to middle console in car to try and press some button, looks like he's trying to turn off ignition. When I'm experiencing this, my button mapped to ignition is not working either.
I am not experiencing this on our other server without entrylist.

 

I'd like to request additional information in the result json files.

• Servername
• Starttime
• Endtime

When you are adding incident output please add the lapnumber where the inciddent happened.

This would really help processing the output for RaceApp league management.
Thank you!

 

Session types are P, Q, R, but in the index you have the values as 0, 4, 10.

In general, can you avoid using numbers as values in the cfg files, and rather use an alpha code? A whole bunch of random numbers is going to make managing files pretty hard. E.g. Driver categories could be P, G, S, B. Cars could be names like porsche_991, mercedes_amg etc.

 

Agreed. Having to constantly look at the handbook to remember every number is a quite annoying over time. Having names like suggested above would be much better

 

I've put them in a txt file on my server

small typo in doco

 

TeamName does not work. But I saw that he has the command in the result.

Code:

            "drivers": [
            {
                "firstName": "Darcy",
                "lastName": "Callai Junior",
                "shortName": "CAL",
                "driverCategory": 2,
                "playerID": "SXXXXXXXXXXXXXXX"
            },
            {
                "firstName": "Cesar",
                "lastName": "Amorin",
                "shortName": "AMO",
                "driverCategory": 0,
                "playerID": "SXXXXXXXXXXXXXX"
            }
          ],
          "raceNumber": 6,
          "teamName": "J6SimRacing e-Sports Team",
          "cupCategory": 0,
          "forcedCarModel": 4,
          "overrideDriverInfo": 1,
          "isServerAdmin": 0
        },

 

I wonder what car 16 will be

 

where cfg and log folders reside

Just tested results file recreation ok.

question - how is "lastLap": 84195 deciphered in to human readable form?

entry list not working, I choose a car but the entry list doesn't force me into the specified car.
is it because my short name was wrong?

also since 1.0.2 track always seems to be optimal

{
"track": "brands_hatch",
"eventType": "E_6h",
"preRaceWaitingTimeSeconds": 60,
"sessionOverTimeSeconds": 150,
"postQualySeconds": 15,
"ambientTemp": 22,
"trackTemp": 30,
"cloudLevel": 0.5,
"rain": 0.3,
"weatherRandomness": 3,
"configVersion": 1,
"sessions": [
{
"hourOfDay": 7,
"dayOfWeekend": 1,
"timeMultiplier": 24,
"sessionType": "Q",
"sessionDurationMinutes": 15
},
{
"hourOfDay": 14,
"dayOfWeekend": 2,
"timeMultiplier": 24,
"sessionType": "R",
"sessionDurationMinutes": 20
}
]
}

 

Not sure about this, its a pretty big part of the series. There is no race in the Blancpain series without a pit stop actually as the shortest round have it forced and the enduros because fuel wont last long enough.

Should be possible in pub server races IMHO, only needs clear session info in lobby and once in the server and on track.

I think 1 hr CP races being run as Blancpain sprint rounds would make sense and being able to run open league type rounds to anyone that meets server requirements and ping limits would be a good option. Not only forcing all this to private closed servers.