Brake Bias Percentage Help

I know what the brake bias is and does, but usually in games when you adjust the brake bias, you can see where the bias is. For example: 55/45 - meaning 55% at the front and 45% at the rear, however I can't figure it out on AC. It just gives me a percentage, but it doesn't tell me whether this is relevent to the front or rear. At the moment it's at 80%, but I can't tell if that's 80% to the front or 80% to the rear. Can anyone help decipher this please?

 

It's the front brake value.

 

Its front, and - as you say - know what brake bias does and is effects on a car, should know that if it were 80% rear bias, you'd be spinning everytime you hit the brakes.

 

Thanks for letting me know, cheers! By the way, how did you figure it out?

 

Well I did try and test it out, but I couldn't quite figure it out with a drift setup on this car, especially since the lowest value is 55% anyway.

 

Because front brake pressure is always high thaner rear pressure, except may special circumstances.

That's simple physics. (dynamic wheel load transfer; sorry, might not be the 100% correct english term for it, it's my 2nd language)

 

If you map the buttons to adjust it, when you hit 'front' the value rises, and decreases when you press the 'rear' button. That's how I figured out what the display was reading.