1. Do you need support for Assetto Corsa Competizione? Please use the proper forum below and ALWAYS zip and attach the WHOLE "Logs" folder in your c:\users\*youruser*\AppData\Local\AC2\Saved. The "AppData" folder is hidden by default, check "Hidden items" in your Windows view properties. If you report a crash, ALWAYS zip and attach the WHOLE "Crashes" folder in the same directory.
  2. FOR ASSETTO CORSA COMPETIZIONE: If you report issues with saved games, please always zip and attach your entire User/Documents/Assetto Corsa Competizione/Savegame folder!
  3. If your game executable is missing, please add your entire Steam directory to the exceptions in your antivirus software, then run a Steam integrity check or reinstall the game altogether.

Fanatec v2 base + carbon formula wheel + table clamp question

Discussion in 'Chit Chat Room' started by C3PO, Feb 13, 2015.

  1. C3PO

    C3PO Hardcore Simmer

    Hi - I am a bit embarrassed to post this but here goes. I have just received my new V2 base, Formula carbon wheel and table clamp. First of all - wow - they are so "substantially" built, impressed! But I am a bit confused about how to attach the V2 base to the table clamp.

    1. Do I unscrew the angled base that already comes fitted to the V2, and attach the vanilla unit to the table clamp - or do I attach the (V2 + attached angled base) to the table clamp? If so, where exactly?
    2. How do the supplied screws hold themselves tight through the clamp into the unit? I cannot see any nuts supplied to hold them in? What stops them working loose?

    Would be grateful for any pix of users' solutions as clearly I am totally rubbish in this area.

    cc: rF2, AC, iRacing forums!
     

  2. Similar Threads
    Forum Title Date
    ACC PS4 - XB1 General Discussions Fanatec CSL Elite Wheel Base 1.1 on XBox One Jun 23, 2020
    ACC Hardware Discussions Thrustmaster TS-PC or Fanatec Wheelbase 2.5 Jun 13, 2020
    ACC Controls & Peripherals [Fixed] Fanatec Formula V2, Wheelbase V2.5 goes Crazy Jun 10, 2020
    ACC Troubleshooting Base fanatec no longer responds May 16, 2020
    ACC Controls & Peripherals Rumble Support for Fanatec V3 Pedals without Fanatec Base like in Raceroom Jun 25, 2019
    ACC Controls & Peripherals FANATEC CSW BASE 2.5 AND CSL ELITE PEDALS LC Jun 12, 2019
    ACC Controls & Peripherals Fanatec CSL Elite Wheelbase (PS4), McLaren Wheel, settings Jan 20, 2019
    Controllers and Peripherals Bugs & Issues AC SETUP MENU - FANATEC CLUB SPORT WHEEL BASE Dec 8, 2018
    ACC Controls & Peripherals No FFB with Fanatec Base v2 Sep 13, 2018
    Controllers and Peripherals Bugs & Issues Fanatec Clubport V2 base V3 Pedels 1.5 Shifter, keep unbinding. May 4, 2018
    Steering wheels discussions Fanatec CSL Elite Wheel Base Belt Tensioners Mod Feb 18, 2018
    Chit Chat Room How to increase Fanatec ClubSport base v2 motor strength? Jan 1, 2018
    Chit Chat Room Fanatec Clubsport base v2 vs. v2.5...users feedback before I buy Apr 3, 2017
    Steering wheels discussions Fanatec v2 base, PS3 mode Sep 26, 2016
    Steering wheels discussions [NEWS] Fanatec will present a new Base, old bases will not work! Aug 26, 2016

  3. Aqib

    Aqib Gamer

    This review helped me set up mine when I first got the table clamp: .

    You can use the angle adaptor or take it off. I preferred leaving the angle adaptor on and I removed the front bit of the table clamp (see video review).

    The holes in the clubsport base are threaded (the holes on the angle adaptor are also threaded) so it is all very secure once the screws are in.

    I wish fanatec provided detailed instructions for thier products... I always have to look at reviews to find stuff out.
     
    Deleted member 113167 and C3PO like this.
  4. Patrik Marek

    Patrik Marek Alien

    heh, I will be dealign with same thing , hopefully soon enough, so it's actually great to know in advance
     
    C3PO likes this.
  5. some1pl

    some1pl Alien

    I did the same thing as Aqib. I removed the front, adjustable part of the table clamp and attached the CSW with the provided angled mount to the flat part of the table clamp. I also removed the mounts for shifter on the right side. Makes the whole thing lighter and easier to attach to the desk.
    The adjustable part of the table clamp is too weak for CSW and makes the whole thing wobble if you attach the wheel base to it.
     
    C3PO likes this.
  6. C3PO

    C3PO Hardcore Simmer

    Thank you guys!
     
  7. C3PO

    C3PO Hardcore Simmer

    This is exactly what I did. I removed the "movable" anlged plat from the clamp itself and attached the fixed angled base directly to the clamp. Feels rock solid now. Thanks everyone very much. Turned a few laps - wow, need to turn down the FFB!!
     
  8. C3PO

    C3PO Hardcore Simmer

    Ok guys -- got everything set up physically ... now, an issue with the calibration. I have installed the latest firmware and the wheel has gone through its start-up turning phase and centred, incorrectly, slightly to the left. On the LED is a flashing CAL indicator. I have pressed - as per the instructions - the analogue Stick and the FunkySwitch at the same time to auto calibrate again. Issue is, I have pressed them - and event held them down together - yet it is still flashing CAL. Am I missing something?
     
  9. Aqib

    Aqib Gamer

    A quick double click (instead of a single click) does it for me
     
  10. C3PO

    C3PO Hardcore Simmer

    Don't worry - all sorted!
     
  11. C3PO

    C3PO Hardcore Simmer

    Thank you everyone for your replies!

    I took out the bolt holding the adjustable plate on the table clamp, removed that changeable plate and attached the fixed angled plate (that already came with the wheel) to the clamp. It is now as solid as a rock!!

    I had the FFB at 90% in one session and the wheel remained rock solid ... just everything else was moving!!! Will write a little review of my new wheel after a week or so of use. First impressions, very nice!

    ATT_1423995001166_DSC_1189 (1).jpg

    [​IMG]
     
    Last edited: Feb 19, 2015
    Deleted member 113167 likes this.
  12. C3PO

    C3PO Hardcore Simmer

    The actual wheel in the new Nissan LMP1 car. Looks familiar ;)

    IMG_20150219_180516.JPG

     
  13. kjelle

    kjelle Racer

    I had to keep the angular adjustment, due to my desk height. Needed to angle it somewhat downwards. Really no problem with stability. Had to tighten the allen screws in the steering weel holder though, before that the wheel vobbled.
    I guess instructions to remove the axle in the angular adjustment, to be able to access the mounting holes, could have been included...
    It takes a while to adapt to a new wheel, my lap times increased to a start, getting lower now.
    I have the CSWv2 + 918 wheel + CSS SQv1.5 combo.
     
  14. Glen Orpheus

    Glen Orpheus Racer

    hope your desk is a sturdy one, received my V2 base and wheel rims in the last few weeks and boy has this baby got some power, had to really bolt down my GT Omega Evo rig :)
     
  15. Aqib

    Aqib Gamer

    It is a bit of a beast. I have gone back to my v1 this week and the difference is massive. The power and smoothness of the v2 is on another level. You don't notice how good it is till you go back to what you had before :cool:
     
  16. PhenOm

    PhenOm Alien

    I'm pretty sure that's just a placeholder, but it is kinda funny that the one being showed there is the same one as the fanatec :p
     
  17. This is great to hear.
     
  18. Strummer

    Strummer Simracer

    FWIW, I like the adjustable angle-mount and have had no trouble with it (on an admittedly very sturdy built-in desk).
     
    C3PO likes this.

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice