Logitech G920 Problems

Good evening,
I don't know whether I'm asking the right question here or whether I'm opening the post in the wrong area.
It's about me playing with the G920 on the PC.
Unfortunately, I only have the problem, as soon as I load a training session, for example, all the power is off my steering wheel and I have hardly any force feedback at all.
I have deleted and reinstalled everything such as Logitech programs like GHUB or LGS, nothing brings anything.
I wanted to ask does anyone know the problem and maybe has a solution? iRacing works without problems, only ACC creates problems.
I know that a G920 doesn't generate a lot of FFB, but e.g. in iRacing or Assetto Corsa I have a really noticeable FFB.

At the point of my settings, I tried everything 50% gain or 100% and the rest to 0% or e.g. only the minimum power to 5%.

Thanks in advance for your help.

 

I do not use g920 anymore that i can not test and confirm atm. ACC sometimes get confused with the controllers. Also send a screenshot of your settings in case you unintentionally set something low.

Try the followings.
- Always power on Wheel sets before ACC (for g920 you may even need to power on before PC)

If your wheel was working OK before,
> Load a different wheel profile. If you do not have one create new. then load back your old.

If your wheel was NOT working OK before, (try one at a time, proceed to next if it does not solve the problem)
>Check GHub. If you have a profile for ACC either delete or reset to default. Disable center spring.
> go to Windows control panel\hardware&sound\Devices and printers. Open device properties of G920 and recalibrate. This usually solves problems caused by Ghub.

BTW LGS and GHub do not get along well if you installed both you will have problems. You will not only need to uninstall both but you need to remove everything related to them in registry, Start up menu etc. Really problematic and time consuming but better then reinstalling windows. Stick with one. LGS was better but does not work well with new games. Ghub does not make any difference (at least for Wheels controllers). I used to install it only for the drivers.

> Go to My document\Asseto Corsa Competizione\Config folder. Back up controls.json and then delete the one in the folder. This will force ACC to recreate a fresh controls.json.

 

Hey

Thanks for your answer !

I'll append my current settings.

So I've got it a little better now (it seems so to me) by using an active USB hub to which I connect the steering wheel.

Nevertheless, the force feedback in the game seems very weak to me.

I tried your idea, now I notice the zsm with the hub, that FFB works very, very weakly.

Logitech Support doesn't want to help me either. I think I can't get around a new steering wheel.

 

Reduce the Dynamic Damping to %50. The higher the percentage it make the wheel smoother. As G920 already smooth you do not need to damp it 100%. If your arms and hands are strong you can even reduce some more like 35-40%. Control and FFB settings are not well explained and it causes confusion.

Also check within ACC if your FFB is clipping. 100% + Road effects usually cause clipping for G920. You may need to reduce gain if you want road effects.

The center spring parameter in Logitech driver is almost useless as many modern sims adjust it themselves. having something/ anything set in driver settings potentially cause problems.

One last thing, Search for G920 LUTs in here and in racedepartment. There was one LUT for AC (which works well with ACC too). Give it a try.