1. Do you need support for Assetto Corsa Competizione? Please use the proper forum below and ALWAYS zip and attach the WHOLE "Logs" folder in your c:\users\*youruser*\AppData\Local\AC2\Saved. The "AppData" folder is hidden by default, check "Hidden items" in your Windows view properties. If you report a crash, ALWAYS zip and attach the WHOLE "Crashes" folder in the same directory.
  2. FOR ASSETTO CORSA COMPETIZIONE: If you report issues with saved games, please always zip and attach your entire User/Documents/Assetto Corsa Competizione/Savegame folder!
  3. If your game executable is missing, please add your entire Steam directory to the exceptions in your antivirus software, then run a Steam integrity check or reinstall the game altogether.

PHYSICS MoTeC telemetry and dedicated ACC workspace

Discussion in 'ACC Blog' started by Aristotelis, Mar 4, 2019.

  1. JnJ | Rayleigh

    JnJ | Rayleigh Simracer

    Hey :)
    I followed your installation guide but unfortunately there is no "MoTeC folder" being created in my doc/acc/ Folder after I went to any track with any car. Does ACC support this with 0.6 or does it maybe not work with the standard version of i2? :/
     
  2. Speak for yourself. This is wonderful.
     
  3. Coanda

    Coanda Alien

    @FatalMistake465 - I take your point. Not knowing this information the Bump & Rebound low% & hi% of the histogram will not be accurate.
     
  4. Aristotelis

    Aristotelis Will it drift? Staff Member KS Dev Team

    Heheheh just a sec m8, you need to wait for the v0.6 release
     
  5. sps_for_race

    sps_for_race Alien

    You've got 0.6 already?
     
  6. Micii1

    Micii1 Racer

    Is it out yet? Is it out yet? Is it out yet? Lol.. Love your work guys
     
  7. Aristotelis

    Aristotelis Will it drift? Staff Member KS Dev Team

    yes it is :D
     
  8. JnJ | Rayleigh

    JnJ | Rayleigh Simracer

    I see.. :oops::oops: Thanks for the clarification :D

    EDIT:
    Well in 4 minutes, I do :DDD
     
  9. You'd be surprised what you can find when looking at brake and throttle traces. You can think you're on the limit, but then look at data and find you are coasting a bit between getting off the gas and on the brakes (I'm guilty of this). Sure over one corner its not a huge difference but repeat this at every braking zone. And that oversteer math channel is like an insight into a drivers mind when used properly!

    When it comes to putting the GT3 cars on GTE tyres, you'd see all the same particularities. Tyres are important but if the set up doesn't allow you to use them properly, you're not going to be able to get them in to the working range and keep them there. GT3 cars are tricky beasts that are far more aero-dependent than people think, and if you don't set up the suspension to give a stable aero platform then you're gonna have a bad time (I was guilty of this too once).
     
    f_deutsch and Aristotelis like this.
  10. Luatz1

    Luatz1 Racer

    So, this means that my friend can send his file to me and we can load both and compare our laps in MOTEC?
     
    donShere, sissydriver and Aristotelis like this.
  11. Aristotelis

    Aristotelis Will it drift? Staff Member KS Dev Team

    Exactly
     
  12. Coanda

    Coanda Alien

    As I have said on this thread, it is a great collaboration you have managed here and I am sure it is very appreciated by the community so please don't take this the wrong way as I know it just got released today. I really hope you can release more channels in the future. AC had 123 data channels logged which still had a few small holes ie. no aero therefore recording of the wings app was required etc... Currently ACC minus a few calculation channels only has 28.

    To name a few, please consider further data analysis channels I/we would like to see is..

    Primary

    - Aero downforce (front & rear etc..)
    - Drag
    - Tyre type ind
    - Tyre temps (surface & core)
    - Tyre pressures
    - Tyre loads,
    - Tyre wear,
    - Camber,
    - Toe,
    - Caster
    - Ride heights
    - Fuel level & max fuel level
    - Brake bias
    - ECU map

    Secondary

    - Ambient temp
    - Track temp
    - Wind speed & direction
    - Raining severity
    - Car damage (when implemented like AC had)
    - Best lap & last lap time
    - Position
    - Flag Ind
    - Brake temps & brake duct setting (when implemented)
     
    Last edited: Mar 4, 2019
    niuqudejuqi likes this.
  13. Atrax

    Atrax Racer

    I've been wanting this for AC for so long!!! Awesome stuff, need to give it a whirl for sure!
    Thanks guys!
     
  14. Aristotelis

    Aristotelis Will it drift? Staff Member KS Dev Team

    As I said before there are specific reasons why we don't release everything.
    Most important is NDAs and sensitive data
    Secondly also very important is that we want a simple enough data set that drivers can start to use to get telemetry experience and also having something realistic to work with. You can't have tyre loads etc in real life so to say (maybe approximations of math channels)

    But to give you an idea, here are some answers to your requests in red bold

     
  15. Coanda

    Coanda Alien

    Understood & thank you for the reply. Like a real racer always asking/busting balls for more ;):D
     
    menos | M6 and Aristotelis like this.
  16. JnJ | Rayleigh

    JnJ | Rayleigh Simracer

    I have different worksheets than on those screenshots when I open my file. Is there a preset or do I have to create those worksheets myself?
    Additionally Section Times isn't working (it says "could not find 'Outings:Laps:Track Sections:Default" in Lap 1) and I also cannot generate the track (it says "Could not convert channel data for the "G_LAT" channel to SI Track generation failed. Courld not get data for the "Corr DIST (Unstreched)" channel.") :/
     
  17. Aristotelis

    Aristotelis Will it drift? Staff Member KS Dev Team

    Please read and follow the instructions on the first post.
    Also check if you're not using some old workspace
     
  18. DoublePass

    DoublePass Rookie

    This is a great edition to ACC no doubt thank you guys so much! I have a feeling it will take me some time to understand everything but still much appreciated! Hopping for some tutorial videos tho lol
     
  19. JnJ | Rayleigh

    JnJ | Rayleigh Simracer

    I read the post three times now, still might be possible I overread something, but before being able to actually load a .ld file, MoTeC i2 wants me to select a workspace and only gives me the 4 presets "Circuit, Drag, Engine and Rally Workspace" but none of which is giving me the worksheets from your screenshots. If i on the other hand just double click the .ld file I get the following:

    moteci2.PNG
     
  20. Aristotelis

    Aristotelis Will it drift? Staff Member KS Dev Team

    So if in the above screen you go to the "menu/Workspace/" you don't find base_ACC workspace to choose from?
    If not, you should copy it as described
     
Similar Threads
Forum Title Date
ACC General Discussions [0.7.2] MoTeC not recording last section of final lap in telemetry Apr 14, 2019
ACC User Interface v0.6.1 Motec telemetry files are not saved in session Mar 7, 2019
Physics Bugs & Issues Left and right ride height bug in Motec telemetry Apr 3, 2017
Programming Language - Apps - GUI Themes (acti) ac telemetry interface (motec output): v1.1.1 May 17, 2014
Suggestions MoTec Telemetry Dec 4, 2013
ACC PS4 - XB1 General Discussions Export for MoTeC Wednesday at 4:41 PM
ACC Physics MoTeC lap samples Jul 3, 2020
ACC Physics MoTeC: Track width and Center of gravify height calculation? Jun 28, 2020
ACC Physics Motec: Brakes sample rate Jun 24, 2020
ACC Physics Motec: Why is there no Ride Height Channel? Jun 14, 2020
ACC Physics Friendly reminder that the MoTeC histograms are still bugged Jun 6, 2020
Troubleshooting - Workarounds Motec files contain laps data May 24, 2020
Console Lounge Are we likely to be able to export Motec files? May 19, 2020
ACC Gameplay MoTeC invalidating laps that are valid May 4, 2020
ACC Physics Help with flat suspension histograms - MOTEC May 3, 2020

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice