[Request] Monza setup Formula Tatuus

Hi all. I was wondering if anyone here has a good setup for Monza in the Formula Tatuus. I'm struggling to get a good stable, fast setup for it . I've tried using an Imola setup with less downforce (2,2) but I still don't feel comfortable with the car generally. Thanks.

 

I have one, but not sure how to send it to you. You do the homework on that and I'll send it through
I must say though, I'm no setup master... I've managed to get within 7 tenths of the current record though.

 

Thanks. I tried to see if it's possible to attach the .ini file of the setup here. It seems it can't be done. This is a little more annoying process but you could open the ini file in the setups folder (Documents\Assetto Corsa\setups\tatuusfa1\monza) and paste the text of the ini file in a post.

This is my setup so far. Like I said, I'm not comfortable with the car as it is but it's not entirely bad either.

Setup:

[INTERNAL_GEAR_2]
VALUE=1
[INTERNAL_GEAR_3]
VALUE=3
[INTERNAL_GEAR_4]
VALUE=6
[INTERNAL_GEAR_5]
VALUE=9
[INTERNAL_GEAR_6]
VALUE=12
[INTERNAL_GEAR_7]
VALUE=15

[TYRES]
VALUE=0
[PRESSURE_LF]
VALUE=16

[PRESSURE_RF]
VALUE=16

[PRESSURE_LR]
VALUE=16

[PRESSURE_RR]
VALUE=16


[WING_1]
VALUE=2

[WING_2]
VALUE=2


[CAMBER_LF]
VALUE=-37

[TOE_OUT_LF]
VALUE=3

[CAMBER_RF]
VALUE=-37

[TOE_OUT_RF]
VALUE=3

[CAMBER_LR]
VALUE=-22

[TOE_OUT_LR]
VALUE=2

[CAMBER_RR]
VALUE=-22

[TOE_OUT_RR]
VALUE=2


[DAMP_FAST_BUMP_LR]
VALUE=32

[DAMP_BUMP_LR]
VALUE=20

[DAMP_FAST_REBOUND_LR]
VALUE=20

[DAMP_REBOUND_LR]
VALUE=10

[DAMP_FAST_BUMP_RR]
VALUE=32

[DAMP_BUMP_RR]
VALUE=20

[DAMP_FAST_REBOUND_RR]
VALUE=20

[DAMP_REBOUND_RR]
VALUE=10

[DAMP_FAST_BUMP_HF]
VALUE=31

[DAMP_BUMP_HF]
VALUE=20

[DAMP_FAST_REBOUND_HF]
VALUE=20

[DAMP_REBOUND_HF]
VALUE=20


[DIFF_POWER]
VALUE=10

[DIFF_COAST]
VALUE=84


[FRONT_BIAS]
VALUE=58

[FUEL]
VALUE=11


[ARB_FRONT]
VALUE=20

[ARB_REAR]
VALUE=1

[SPRING_RATE_LR]
VALUE=80

[ROD_LENGTH_LR]
VALUE=20

[SPRING_RATE_RR]
VALUE=80

[ROD_LENGTH_RR]
VALUE=20

[SPRING_RATE_HF]
VALUE=115

[ROD_LENGTH_HF]
VALUE=12


[PACKER_RANGE_LF]
VALUE=45

[PACKER_RANGE_RF]
VALUE=45

[PACKER_RANGE_LR]
VALUE=43

[PACKER_RANGE_RR]
VALUE=43

 

If the forum doesn't allow the attaching of ini files the person sending file could just rename the file from setupname.ini to setupname.txt Then the recieving person downloads and renames it back from setupname.txt to setupname.ini
logs are text files and i have seen them uploaded on the forum.

Another way would be to zip it if you don't have a zip app you can use windows in built one, Right click the ini file > Send To > Compressed (Zipped) Folder and upload the zip to the forum

Or zip it and put it on a file hosting site and share the download link which is one of the more common ways

Below I have also attached a ini from the documents folder and seems to attach to the forum just fine

 

i think you're wings too low.... i try it and i'm 0.6 sec faster in first Sector but i'm 2 sec slower in the second.... and i go out on the ascari where i'm 20kmh slower than my setting..., you have default camber and toe_out, i think you can't reach the right tire temp on front try increase front camber and front toe_out, i'm working on my setting and I do not mean that my values are correct (1.53.5 only abs, i'm far from aliens 1.51.1)...
remember make a good setup require a lot of work....
first tire temp and car stability
after find a compromise from speed and stability
sorry for my bad english