"Public beta" 1.0.3 - v2

After a long search, I finally found a server (The ping seems good )

Then I clicked on "Refresh Data" again and found no server again, after 50 attempts (every 6 sec) I gave up then

 

Yes looks like we may be getting ping-screened from the CP servers in Aussie-land now

 

Thanks these are all working as intended, @Minolin thanks for the entrylist for pub servers as we no longer need to run private servers for league practice guys. Can keep these open with high restriction and get some solid racing and the guys that haven't got their km up yet can still join in. Before we needed a private server and a restricted public one now we can just keep 2 open with different combos.

Originally I had overrideDriverInfo= -1 which didn't work but checked back in the handbook and its meant to be 0 and this now works. Must have got confused by the forced car model -1 setting

 

They work on my P1, may just be an issue on the V2/formula rims?

 

Okay, interesting, so the funky switch works and the joystick? Only my funky switch works.

 

Ah sorry my mistake, I was referring to the funky switch - the P1 does not have a joystick.

 

After updating to Public beta 1.0.3 - v2 I started the sim in desktop mode and it froze on the Unreal Engine loading screen.
Had to log out and back in to gain access to my desktop again.

Second attempt just loaded fine.

 

Whereabouts are you based? I'm in the UK and have only ever seen the CP Servers appear twice. It appears that I have the same problem as you.

 

Finaly keyboard customization!

 

At least ! Now I will be able to use VrPixelDensity ingame instead of Oculus Tray Tool workaround.


***Edit : well... it doesn't work.
Or I misunderstood this fix : HUD stereo layer clipping with the car geometry
for me it's related to the bug with the HUD hidden behind the geometry of the car.
I tried in 1.03 : Resolution Scale 100 and Vrpixel Density 130 : the bug is still here.
Maybe it works with a clean reinstall of everything...?

 

Okay

 

The same for me except I am full screen mode. I have not experienced this type of freeze on startup.

 

@Minolin @pankykapus

Even with this 1.0.3 release, at the end of the race my dynamic station crashes, as if the telemetry data did not arrive any more, it would be a good idea for it not to stop or go to the pits everything runs smoothly.

Thank you

 

CP server has a quali time of > 120 minutes...?
[edit]
now it switched to race 177 minutes,

 

It works for me.
Its not right o the front as you would expect, its more of a ghost image where you can still see the bodywork of the car as well as the HUD.
Before the HUD used to clip through the bodywork and part were hidden.

 

Just curious... (motion rig user here) Is telemetry suppose to continue to be sent after the race has finished? My motion rig always stops part way round the cooling down lap. (first world problem I know, but it feels really odd)

 

I expected the HUD to be readable actually... For now I still can't see my time laps, time session, and rating.
So I went back to the good old workaround : OTT with PDD 1,3.
Not really a problem for me since I must use OTT to deactivate ASW to avoid stuttering.

 

@Minolin @pankykapus

to you, thank you.

 

Tried 2 MP sessions: in the first it was a stuttering mess, fluctuating, desappearing and reappearing cars all around. It caused a mass accident at the race start.
The second try was a little better(but only 9 drivers on server) but very very worst than the beta 1.0.2
Never had problems befere. Will give another try and will post the log files if the problem persist.